Pharmaceutical facilities and laboratories run equipment that is both expensive and unforgiving: analytical instruments, incubators, refrigerators and freezers, reaction controllers, and validated systems where a power event can ruin a batch, void an experiment, or break the cold chain. UPS specification for pharma and labs is about clean, continuous, isolated power and protecting temperature-sensitive storage.

Why Online Double Conversion Is the Default

Sensitive instruments and active-PFC power supplies need a clean sine wave and zero transfer time — exactly what a true double-conversion online UPS provides. Paradyne's range outputs a regulated 230V ±1% true sinewave with harmonic distortion under 3%, isolates the load completely, and includes an inbuilt isolation transformer that protects sensitive analytical electronics from common-mode noise (see isolation transformer benefits).

Protecting the Cold Chain

Freezers, refrigerators, and stability chambers protect high-value, often irreplaceable materials. These have inductive compressor loads with startup inrush, so size the UPS with headroom for motor startup — the same consideration covered in UPS for cold storage. Pair the UPS with a generator for long outages so the cold chain holds through extended events.

Validation and Documentation

Regulated environments value traceability. Specify BIS certification under IS-16242, NABL-backed test reports, and full technical documentation to support qualification and audits. The performance framework is IEC 62040.

Sizing and Backup

Separate the instantaneous critical loads (instruments, controllers) from the cold-chain loads when planning autonomy — you may want longer backup on storage than on benchtop instruments. Size against measured load with margin; see how to calculate UPS capacity.

What to Specify

• Online double conversion, true sinewave, isolation transformer.

• Startup-inrush headroom for refrigeration and chambers.

• Generator compatibility for extended cold-chain protection.

• BIS / IS-16242 certification and full documentation for qualification.

Related: UPS for hospitals and healthcare. Tell us your instrument and cold-chain loads and we will size a clean-power solution.